Author Archives: Rolling Auto Service

The ABS prevents the brakes from locking up because, with a sudden braking motion, the driver can lose control of the car.  An ABS is credited with preventing collisions, making anti-lock brakes service essential on the roadways of today.

Who invented anti-lock brakes?

The anti-lock brake, also known as ABS, is an anti-skid brake system for cars, motorcycles, and trucks, even on aircraft! In fact, ABS was installed and used on aircraft before it was used on daily vehicles.  Prior to ABS, when we had to suddenly apply our brakes, controlling the car wasn’t possible, and the car would go into a slide or spin. 

A unique form of the anti-brake system was installed in the 1900s on a few models, including the all-wheel-drive Ford Zodiac. But it was an expensive system and was proven to be unreliable, so production was ended. 

The ABS used today was created by Mario Palazzetti, who sold his invention to Bosch Mobility Solutions in the 1960s. As Bosch improved on his invention, it became a more advanced and reliable system, and would soon become a standard feature we know today. 

When do anti-lock brakes take effect?

A vehicle that is fitted with the anti-lock brake system activates when the brake pedal is pressed firmly and quickly, in an emergency stopping situation. It senses this motion and the wheels locking up. 

What does it feel like when your brakes lock up?

In a vehicle that isn’t equipped with anti-lock brakes, as soon as you press on the brakes, you can feel the wheels locking up. You should release your pressure from the brake pedal and start pumping it until the vehicle comes to a stop. When a vehicle is equipped with anti-lock brakes, as you press on the pedal firmly and fast, you’ll feel a pulsing and vibration in the pedal. 

Can anti-lock brakes be disabled?

While the idea of anti-lock brakes seems to be a brilliant idea, many question the possible dangers of the system. Cars from the factor come with a speed sensor on each wheel. That sensor alerts the computer when any of the wheels suddenly stops, the indication that the brakes have been applied by the drive. 

 The computer then takes over the driver’s ability to brake and release momentarily, allowing the wheel(s) to re-establish their traction. After the wheel(s) begin to turn normally, the computer reapplies the brakes. It goes through a rinse and repeat method until the vehicle stops.

Experienced drivers find this dangerous and annoying because they lose total control of their vehicles.  The in-experienced driver may or may not benefit from anti-lock brakes, all depending on how attentive they are to their driving and what’s on the roadway.

Can anti-lock brakes reduce braking distance?

Yes, and this can be a bonus when you’re driving on slippery roads. Anti-lock brakes in snow can make for optimal stopping distances and keep a vehicle from going into a skid. If your car has an anti-brake system installed from the factory and you live in areas where rain and snow, having a professional anti-lock brakes service check is an essential part of owning a vehicle. 

What causes anti-lock brake problems?

If your vehicle is having any of these four issues, schedule an appointment for anti-lock brake service job: 

ABS Light Malfunctioning

The ABS light should turn on when the car is first started as the main computer system checks the anti-lock brake system. The light should turn off after the test is completed and the system passed. If the ABS light turns on at other times or doesn’t go out after starting the car, you should schedule an anti-lock brake service inspection. It could be an issue with the main computer or there the ABS system has a malfunction. 

ABS Sensor Malfunctioning

The brakes have ABS sensors installed at the factory. Driving the vehicle can cause the sensors to get dirty with dust and road grime. Once they are covered, they can’t send information to the main computer and will malfunction, causing the ABS light to come on. You can clean the sensors yourself or have an anti-brake service tech clean the sensors and check the system. 

Damaged or Faulty Wiring

If the ABS wiring gets damaged or comes loose, it triggers the ABS warning light to come on, or causes the total ABS to fail. Anytime the ABS light is illuminated under normal circumstances, have a professional anti-brake service.

ABS Controller Malfunctioning

The ABS controller is what monitors the wheels and determines how fast they are turning. The controller engages the ABS system as needed based on the rotation of the wheels. The faster the wheels rotates indicates you’re driving faster. The faster you are driving your car, the more you need to depend on the anti-lock brake system. If the controller or any other part of the ABS fails or malfunctions, it can be dangerous to you and others on the road.

The following are five signals you need an alternator or car battery replacement: 

1. DIM HEADLIGHTS

When the alternator or car battery is failing, it can’t power the electrical components of your car, like the headlights. If your headlights seem to be dim or weak, have your mechanic check the alternator and battery, replacement of one or the either may be needed. 

2. CLICKING SOUND 

When you turn the key in your car’s ignition, it is the battery that tells the electrical components to start, like the starter solenoid. If your car is needing a starter, solenoid, or battery replacement, you’ll hear a clicking sound instead of a car starting. You can have your jumped off, and if the car starts, get to your mechanic as soon as possible. Don’t count on it starting again, jumped off or not. 

3. SLOW CRANKING

If your car doesn’t sound normal when starting it, you may need a battery replacement. It will have a slow and sluggish crank, and will eventually start, or it will not start at all. 

4. KEEPING THE GAS PEDAL PRESSED

To get a car started, you should only have to press the gas pedal once. If you’re having to keep pressing on the pedal to get it started, it may be a carburetion issue, or you may need a battery replacement. Either way, you should have your mechanic check the issue.

5. BACKFIRING

Yes, a bad car battery can make a car backfire because of intermittent sparks allow fuel to accumulate in the cylinders. Once the fuel is ignited, it increases the force and then it backfires. There are several issues that could be the problem, and a battery replacement may be one of those issues. 

Again, some of these issues can be something other than needing a battery replacement. To know if it is a battery vs alternator, or battery vs starter problem, a mechanic can perform several different tests to confirm the problem. 

What should you do when a car battery keeps dying?

Once you have your car started, if the battery keeps dying, it is frustrating. And it can be dangerous too!  So, what could cause this to happen? 

• Accidentally Discharge

External or internal lights were left on by mistake, or because the auto shutoff didn’t work, will drain your battery. 

• Only Short Trips

Your battery powers the starter motor when the key is turned. After the car starts, the alternator keeps the battery charged. If you only make short trips, then the battery may not be getting charged enough. 

• Corroded Cables

Even with a brand-new car battery, if the cables are corroded or dirty, they can’t charge the battery enough to keep it charged.  Clean the cable ends and battery connections will usually work so that you don’t need another car battery replacement. 

• Electrical Taxing Modifications

A properly battery should put out at least 14 volts with the car running.  Any upgrades to car that pull from the electrical system, like a new radio, it can tax the battery, especially if it is an older battery. A new car battery replacement may be needed. 

• Failing Battery

When a car battery has been run down multiple times, it creates an internal sediment buildup and is unable to hold a charge. It is time for a car battery replacement. 

Do I connect the positive or negative first? 

If you don’t work with car battery replacement consistently, it can be hard to remember the specifics to connecting and disconnecting. For the disconnecting process, the negative cable is first, followed by the positive. When connecting a new car battery replacement, the process is reversed. Connect the positive cable first and then the negative cable. 

What happens if I disconnect the positive terminal first?

When doing a car battery replacement, the utmost care is important because the chance of touching the cable to any metal surface is easy. That can cause a spark and the battery can catch on fire, explode, or burn the car’s electrical system out. Always remove the positive terminal second! 

Why is my car battery not charging? 

This can be because the alternator is bad and not charging the battery. Corrosion is another reason that a battery can’t charge. 

Why does car battery die when not in use?

From starting your car to keeping it running, the battery is an essential key part of your car. The clock, radio, security system, and computer all continue to draw power from a car battery even when the car isn’t running. This is a parasitic drain, aka key-off battery drain, and will drain a battery dead even with a car not being driven for weeks. 

While the alternator’s job is to keep the battery charged under normal conditions, when a car just sits idle for an extended amount of time, it can damage the battery. How long your car can sit unused without killing the battery will depend on how healthy and how old the battery is. On average, a battery that is three years old or older that sits for a month or more will need a car battery replacement. 

The following tips will help you maximize the performance of your car battery and keep your car running. 

1. Lights​​​.

Leaving the dome light, headlights, or the interior lights on will drain a battery quickly. When this is done too many times, a car battery replacement is needed.

2. Condition.

A battery ha is poorly maintained will weaken it to the point it can’t hold a charge for long. Even the memory function of the radio can drain a weak battery.

3. Connections.

Corroded or loose battery connections prevent a battery from charging while you’re driving. So when you park your car, the electronic components that continue to drain the battery are pulling off what charge is left in the battery. Cleaning the connections and tightening any loose connections could save you from having to purchase a car battery replacement.

4. Parasitic Drains.

There are parasitic drains that are hard to find that can kill a battery. Even lights in the glove box or trunk can drain a battery. 

5. Temperatures.

Cold and hot can’t kill a good battery, but it will kill an older battery or one that isn’t in good condition. Extreme cold and hot temperatures magnify underlying issues.

6. Charging.

If a battery dies while driving, it is likely a problem with the charging. Belts that are loose, stretched, or worn tensioners will keep the alternator from doing its job of charging the battery. You may need the alternator changed in addition to a car battery replacement. 

Is it safe to drive my car with the battery light on?

You can, but it isn’t recommended. With a bad battery, a faulty alternator, or bad wiring, your car could lose power at any time and leave you stranded. If the battery light comes on, get your car to the mechanic as quickly as possible. 

What can drain a car battery when the car is off?

In addition to the things we’ve already mentioned, like leaving the lights on or the parasitic draws on a battery, there are other things that can drain a car battery. One is not driving your car far enough or long enough to charge up.  A battery that is older than 3 years can drain fast as well. If the current battery is 3 years old or older and it keeps losing its charge, your best solution is a new car battery replacement. 

How do I find out what’s draining my car battery?

If you have one or know somebody with one, a multimeter can help you find the hidden cause of your car battery draining.  Connect a digital multimeter to the negative battery terminal. Now, remove one fuse at a time and keep watching the multimeter reading. If the reading drops when you pull a fuse, there’s your problem! 

How can you tell if your car battery needs replacing?

Any of the following 7 things are hints that it is time for a car battery replacement: 

1. Engine is slow starting.
2. The headlights are dim or your having electrical issues.
3. The check engine light has come on and stays on.
4. A bad smell from under the hood around the battery.
5. Connectors keep corroding.
6. A mis-hap with the battery case.
7. The battery is older than 3 years.

At what percentage should a car battery be replaced?

There isn’t a steady number to rely on for knowing when you need a car battery replacement. Batteries don’t wear out steady, they can go from having 90 percent performance today and having only 20 percent in a month or two. Having your battery checked and tested regularly is the best way to reveal when it is time to replace it. Can a car battery last 20 years? Not likely – the longest car battery life is 5 to 7 years, rarely 10 years. 

What to Look Out For

The transmission moves the engine-generated energy to the wheels and makes your car move. There are different types of car transmissions, each having a different ratio between the engine and the wheels. This ratio can determine how fast a car moves, or in cases where you need transmission repair, not move. This leads us to our next question. What are the symptoms of a bad transmission? There are six signs that your car needs transmission repair or maybe replacement: 

Doesn’t Respond or Slow Response

If your car hesitates to move or doesn’t move at all when it is in gear, you have a transmission problem. In an automatic transmission car, it will usually have a delay going between gears. In a standard transmission car, you may feel or hear the engine revving up, but find your car isn’t moving. 

Odd Noises and Sounds

Vehicles all have different noises, but when you hear an odd noise or sound like a buzzing, clunking, humming, or whining and find the car isn’t moving, you may need a transmission repair. Most transmission repair shops will offer free towing and inspection with a complete transmission repair or replacement. Strange sounds coming from the transmission while it’s sitting still are a concern for possible transmission repair too. 

Leaking Fluid or a Burning Smell

An automatic transmission requires fluid to keep the internal parts lubricated and working correctly. When that fluid leaks out, eventually the transmission will overheat and quit working. You’ll know when you have a transmission leak if you see a puddle of red fluid under your car. It also has its own smell, especially when it has gotten hot. 

Grinding, Jerking, or Shaking

Transmission repair or replacement may be needed if your transmission has been shaking, jerking, or has a grinding sound. It is often referred to by mechanics as a slipping transmission and can often be repaired by replacing or tightening existing transmission mounts. 

Transmission Won’t Go into Gear

This can happen while sitting at a signal light. You push on the gas, the engine revs up, and the car doesn’t move. As all the cars behind you begin honking and going around you, you keep giving it the gas only to have a revved up engine and a car that still isn’t moving. This could be a transmission repair that can be done by adding fluid, changing the screen, or flushing the transmission. You may also have a bad clutch or computer chip. If none of these repairs fix it, then you’ll need a new transmission. 

The Service Engine Soon Light

When the Check Engine Light comes on, you need to have your car examined by a professional mechanic. If that light comes on and the car isn’t moving, then your car probably needs a transmission repair or replacement. 

What happens when the transmission goes out?

When a transmission goes out, a car’s handling is affected. With a transmission slipping or vibrating, you could find it shifts differently, and it’s also possible the gear shift will stop working. 

Possible transmission repair or replacement can range from replacing the pump and changing the filter to installing new gears. Installation of new gears will require the transmission be torn apart, which is considered a transmission rebuild. 

A professional mechanic or transmission shop will inspect and test the transmission. They will then advise you on which option is needed for your car: transmission repair vs rebuild. 

What causes a transmission to go out, and why do transmissions fail?

There are many interrelated mechanisms and parts within a transmission. There are also many problems that can develop to cause a transmission to fail or simply quit working. While it isn’t going to be inexpensive, a  transmission repair is the less expensive option overall when it comes to replacement. Some common issues that can cause a transmission to fail and quit working are:

• Leaking transmission fluid
• Clogged and dirty transmission fluid filter
• Broken transmission bands
• Broken transmission gears
• Faulty Torque Converter
• Ruptured Transmission Seals

Leaking transmission fluid is something you can check yourself. There will be a puddle of red fluid under your car. Often a transmission repair will fix this by replacing ruptured transmission seals. Other times, it can be the bands have slipped, and a transmission replacement or rebuild will be required. You can also have the transmission filter changed and having new fluid added to your car will often fix issues such as a slipping transmission. 

1. It Sounds Off.

If your car starter clicks, grinds, or whirs when you try to start your car, you need a car starter replacement. However, a car started going out doesn’t always make a sound, you may get no noise at all. This is when it could be confused with a dead battery.

2. The Lights Are on but Nothing Happening.

If you try to start your car and get a lit-up dashboard but nothing from the engine, it may be the starter has quit working.  

3. The Engine Isn’t Cranking.

Is the engine isn’t cranking up, even with a friend or tow truck jumping it off, you need to get your car to a certified technician. They will inspect and test the start, battery, and alternator and advise you if you need a car starter replacement or something else needs replacing or repairing. 

4. Smoking under the Hood.

Smoke coming from under the hood isn’t good no matter what the problem is, but for certain, if it is the starter smoking, it could be an electrical issue. From circuits shorting out or fuses blowing out, they both can overheat a starter and keep it from working. Or a bad starter can cause the fuses to blow and the circuits to short. Either way, a car starter replacement is needed. 

5. Oil-soaked Starter.

A car starter is connected to the motor, typically on the driver’s side, right below the cylinders. If you look under the hood and see the start soaked in motor oil, there’s one problem. The starter won’t start when it is soaked in motor oil, and you need to find out why the cylinders are leaking oil too. 

Can you jumpstart a car with a bad starter?

This is where many get confused between car starters vs battery problems. If you have an automatic transmission car, jumpstarting does nothing to help the starter. It only powers up the battery. However, if your car has a manual transmission and the car starter quits, you can push start the car with someone in the driver’s seat “popping” the clutch.  This will work for a while, but eventually, a car starter replacement will be needed. 

How to start my car if the starter is bad?

It isn’t recommended, but yes, it is possible by one of the following methods: 

• Examine the Connections: Make sure all electrical wiring is connected that control the ignition. An unsecured connection in this pathway will not allow enough power to get to the starter. 
• Examine Ground Connection: Connect a jumper cable from the battery’s negative terminal through the structure and try to start the car. If this works, then the problem is with the ground connection and a car starter replacement won’t fix that problem. 
• Examine The Solenoid Cable: The solenoid is why the starter connects to the transmission. Check the solenoid for dirt, grime, and rust, clean it off and then try to start the car again. Sometimes, you an bypass the solenoid with a cable directly to the start and start your car.  This should only be a temporary fix until you get a car start replacement installed.
• Check For Corrosion: If a cable within the system is corroded, it will jeopardize the electric conductivity and your car won’t start. Any corrosion on the battery or other electrical components can be cleaned off using baking soda and water of equal parts and wash the corrosion off with a wire brush or old toothbrush. Allow to dry then try to start the car again. 
• A Soft Thump To The Starter: Old school method is to ever so soft, thump the starter with a hammer. If there is a short in the starter, this will sometimes allow it to start the car.  Again, another temporary fix and a new car starter replacement is recommended. 

Can a car starter drain the battery?

Yes, in fact, anything electrical can pull energy from the battery and drain all of the power from it, keeping it from starting the car. You’ll need to replace the battery in most cases, but first, find out what drained the battery so it doesn’t do it again. 

Can the car starter be repaired?

Yes, but it isn’t a quick job.  Most people will purchase either a brand new start or a rebuilt starter, which is less expensive. The rebuilt starter is one that has quit working and a trained mechanic or technician replaced the armature, field windings, brushes, commutator,  and sometimes the solenoid. 

Why is my car taking a long time to start?

If there is a delay between when you turn the ignition key and the car starter kicks in to start the engine, there is likely a connection that is corroded or has a poor connection. Have the alternator, battery, starter, and solenoid checked by a technician. 

The basic scheduled car maintenance checklist typically consists of the following: 

30/60/90K Checkup and Maintenance

The 30/60/90K checkup appointment will include several areas of your car to be inspected. An ‘every 30k mile’ auto maintenance and checkup is to assure that all is working correctly and safely with a multi-point inspection.

Oil Change

This is the most common auto maintenance. For most cars is between 3,000 and 5,000 miles. Regular oil change will ensure the engine is being properly lubricated throughout the engine internally, preventing any metal on metal contact. 

Tune Up 

The tune up will include replacing the air filter, spark plugs, (wires if present), fuel filter, and fuel injection cleaning.  These things can all affect your car’s fuel economy, and your mechanic will be able to advise you what your car needs in this area of routine auto maintenance. 

Timing Belt Replacement

The auto maintenance will include inspecting the timing belt, looking for cracks or other indications it is about to break. Getting the changed before anything happened will minimize the need of extensive repairs later, or worse, a new engine.

Fluid Flush

There are several fluids within a car and part of the auto maintenance routine is to flush and change these fluids. This removes any possible contamination that could damage the engine. 

Is a car service necessary?

The purpose of automotive scheduled maintenance is to keep the car in proper functioning state and prevent  most unexpected brake-downs that require expensive repairs. A car will haves a longer lifespan and better performance  with regular auto maintenance. The minimal cost of money and time it takes is well worth it at the end of the day. 

How often should I service my car?

The year 2020 was unexpected and unpredictable, and with all that brought us, being quarantined to our homes, auto maintenance wasn’t at the forefront of our minds.  However, life is returning to a normal, albeit a new normal, and we need to get back to the routines that matter. Auto maintenance needs to be one of those routines. 

Most mechanics recommend scheduled car maintenance by mileage, the 30-60-90 service schedule. Meaning, you schedule your car for auto maintenance every 30,000 miles starting at the 30,000 mile mark and continue that every 30,000 miles. 

However, during the times in between the 30-60-90 mile intervals, there is still auto maintenance that should be kept every 3,000 miles, starting at the 3,000 mile mark. Those interval auto maintenance checks should include: 

• 3,000 miles: Battery, belts, and cables 
• 6,000 miles: Transmission fluid, windshield washer fluid
• 9,000 miles: Power steering fluid, lights 
• 12,000 miles: Coolant, tires

During 2020, many of us didn’t drive our cars, but every year, there are many that don’t drive anyway, quarantined or not.  That is the one of the worse things you can do for you automobile. A ten minute drive once week is recommended to keep the gas and oil moving through the system, keep the tires from going flat, and more. 

When should you schedule car maintenance?

It’s pretty simple reason:  Auto maintenance will keep your vehicle running safely and smoothly. Yes, you have your car payment, car insurance, and registration, to pay for, those are required by the bank and the government.  

Your auto maintenance is just being smart and fortunately, many of the things you don’t have to pay a mechanic to handle for you – you can do some of the basics yourself, like checking the oil, transmission fluid, and tire pressure. Use the owner’s manual that came with your car and the multitude of YouTube videos to help you with these things, and you’ll find yourself needing your mechanic less and less. 

Keeping your car maintained can extend its life. Need car maintenance in Venice, FL? Call Rolling Auto Service today at 941-493-6511.

• Compressor
• Condenser
• Evaporator
• Orifice tube 
• Receiver dryer 

The most typical problem that most car AC repair technicians are faced with are: 

• Coolant: Many cars with air conditioner not working is because the car needs coolant. The car AC repair technician will top it off or replace it completely. The coolant is exposed to extreme engine and road heat, dirt, road debris, quick stopping, and vibrations. The coolant will evaporate eventually.
• Compressor: The car AC repair technician will check for clogs and  leaks with the compressor. Clogged and leaking compressors can’t build up a pressure high enough to cool the refrigerant. 
• Cooling fan: This will be inspected the replaced if needed. After a lot of use, a cooling fan can burn out, the blades get chipped, a fuse blows, or a relay gets burned. If the fan was poorly installed, or has come loose, a car AC repair technician will repair if possible or suggest a replacement. 
• Electrical:  An electrical problem can be caused by faulty signals being sent that don’t let the air conditioner cool. This can be a bad module, bad sensors, or a  broken wire.

Why did my car AC stop blowing air?

If there isn’t any air coming through your car’s ventilation system, it doesn’t mean the air conditioning is broken. It may be the fan. The majority of cars on the road today have one multi-speed fan and it blows air through several ducts and vents that are selected by the driver. 

These different speeds are determined using the climate control system that consists of a small computer module. The fan switch sends signals to the computer module that tells the blower module when to activate the fan. A car AC repair technician will often determine that the fan is burned out and quit working or only works on one speed (usually the lowest or the highest). 

 An air conditioning technician may also find that the resistors themselves are burned out. This is an easy and fast car AC repair. Most cars that is two screws and disconnect the electrical connection. 

However, not all cars are the exact same, which is why taking your car in for professional car AC repair service is recommended.  Car AC repair technician has been trained with car ac repair how to make the repairs and has the proper car ac repair tools to do the job correctly, as well as recharge the system with freon. 

What does it mean when your car AC blows hot air?

If your car air condition is blowing warm air, it could be one of the following issues: 

• REFRIGERANT LEAK: Most car AC repair needs are because the refrigerant (freon) has leaked. A trained air conditioning technician will check for leaks and if they can be repaired or if the unit needs to be repaired. 
• FAULTY CONDENSER: The air conditioning system in a car pulls heat and humidity out of the car and is absorbed by the refrigerant. The condenser keeps the refrigerant cool and the cycle continues. If the condenser isn’t working, the entire car air condition process stops working. 
• BROKEN COMPRESSOR: A car’s air conditioner main component is the compressor. It is what circulates the refrigerant so if the refrigerant isn’t circulating, the air conditioner isn’t working. 
• ELECTRICAL SYSTEM: What if all the air conditioning components are working but hot air is still blowing out the vents? Most likely, the car AC repair technician will find a blown fuse or frayed wire.

How do I know if my timing belt is worn out?

The timing belt isn’t where you can visually see it  as soon as you open the hood, it is located close to the engine’s front end.  There isn’t a warning light on the dashboard of your car that tells you a timing belt replacement is needed. However, there are some symptoms that will tell you that your car needs a timing belt replacement: 

Ticking Noise 

A car engine is something like the human body. The knee bone is connected to the thigh bone, and the timing belt is attached to the engine with a series of pulleys. Those pulleys operate the camshaft and crankshaft, and the crankshaft powers works the rods, the rods work the pistons. The camshaft works the cylinder head valve  and rocker arms, to send fuel to the combustion chamber. The ejected gases pass through the exhaust manifold.  So, when the timing belt begins to weaken or breaks, a ticking noise is heard from inside the engine. A clicking sound also comes from the engine when it is low on oil. In either case, immediate attention is needed by a mechanic who will add oil to the engine or determine if a timing belt replacement is needed. 

Engine Won’t Start

When a timing belt is broken, the engine can’t turn and start. This is discovered when you insert the key to start the motor, you’ll hear it engage, but it doesn’t crank. That is because the camshaft and crankshaft can’t engage the pistons and get the fuel to the engine. It is possible for your timing belt to break while driving it too. You won’t be able to drive your car until you have a timing belt replacement job, and there is a chance that more damage has been done to the motor that the timing belt replacement isn’t enough. 

Oil Leak

An oil leak from the engine can be a symptom of a few things, one of them is the timing belt has broken or is worn out.  There are bolts and nuts on the timing belt cover that hold it in place, protecting the timing belt. When the timing belt has begun to wear out, oil will begin leaking around those bolts and nuts. Fortunately, a timing belt replacement will usually fix that problem. However, an oil leak from the engine block indicates more serious engine problems. 

The Exhaust 

If there is more smoke coming from your car’s tail pipe than normal, that can be an indication that a time belt replacement is necessary. As soon as you notice excessive amount of exhaust, have your mechanic inspect the engine. Finding the problem sooner than later could be the difference of hundreds to thousands of dollars. 

RPMs Acting Up

If the RPMs of your car are acting strange, it could be because of a bad timing belt. It could have broken teeth, or it has completely broken. 

What does a bad timing belt sound like?

A timing belt that is wearing out, where some of the teeth have worn down on the rubber belt, will cause a ticking noise. The sound will sound like it is coming from the engine front, which can often sound like a rod knocking. An experienced mechanic check the oil first to make sure that isn’t the problem, then check to see if a timing belt replacement is necessary. 

When a timing belt breaks, the engine will create a whining noise when you try to start the motor. This is because the pulleys the timing belt works the camshaft and crankshaft are spinning with no belt resistance. 

Can you drive with a bad timing belt?

You can’t put off a timing belt replacement until it is more convenient. If your car won’t start, it could be the alternator, battery, out of gas, or the timing belt is bad or broken. If the timing belt is wearing out, your car will start and run, until it breaks as you’re driving down the road. This is why you need to be aware of the indicators we listed above so that you know to get your car inspected by a mechanic. 

How often do you have to replace a timing belt?

Timing belt replacement miles or years aren’t the same for every car because everyone has different driving patterns, however, regular timing belt replacement between 60,000 miles and 100,000 miles is recommended. Using the services of the same mechanic will help them learn your driving patterns and their timing belt replacement recommendations could be every 50,000 miles or every 100,000 miles.  If you put a lot of miles on your car in a short time, your car will benefit from a timing belt replacement sooner. 

Can a fuel pump go out without warning?

Absolutely! A car fuel pump will fail without warning more often than you may think. All things related to a car fuel pumps like the injectors, the  pressure regulator, and the car fuel pump itself are the part that are most replaced with the fuel system. Any of these components have a problem can cause a car fuel pump to quit, leaving you sitting at the intersection. a bank or fast food drive through, anywhere at any time, without any type of indication or warning.  

Will check engine light come on for fuel pump?    

It depends on the age of your car, but newer cars have an OBD system (on board diagnosis) and the check engine light or service engine soon light will come on. There is one drawback to the OBD system – there can be more than a 1,000 reasons that light has come on, and a car fuel pump is only one of those reason. 

When that OBD light comes on, the best thing you can do is take it to your mechanic and have them run a diagnosis with a special computer they will connect to the OBD sensor.  

This will provide them car fuel pump diagnosis as well as other diagnosis by a series of codes and lights. Each make of vehicles of certain year will have specific codes and your mechanic will have a guide detailing those codes. Possible causes the OBD reading from your car fuel pump could be:

• Weak fuel pump.
• Clogged fuel filter or screen.
• Fuel line restricted. 
• Car fuel pump driver module faulty.
• Car fuel pump pressure sensor faulty.

How dangerous is a fuel pump malfunctioning, can you drive with a bad fuel pump? In most cars, a fuel pump will not have any spark causing it to explode. However, you won’t be able to drive your car with a bad fuel pump because it won’t be pumping fuel into the engine. If you’re unfortunate enough that your car fuel pump goes out while you’re driving, you’ll simply be stalled out where you are sitting. If you’re going down the road, your call will die and won’t restart. If this happens, turn your emergency flashers on and try to coast your vehicle to the side of the road then call for help. Call 941-493-6511 today for your fuel pump in Venice, FL.

What could cause the check engine light to come on?

When your check engine light comes on it means your car’s computer has detected a malfunction. What that malfunction is could mean different things:

• A loose gas cap
• Faulty ignition coils
• Faulty spark plugs
• Faulty catalytic converter
• Faulty oxygen sensor
• Faulty mass airflow sensor
• Faulty evaporative emissions purge solenoid
• Faulty fuel injector

Can low oil cause the check engine light to come on?

Another reason your check engine light might come on is low oil pressure. If your oil pressure is low, however, the oil light will also come on. Low oil pressure occurs because of wear and tear on your oil pump or from letting air in the pump or putting too much oil in it.

Can check engine light come on when cold?

Extremely cold temperatures could cause your check engine light to come on. If ice forms near electrical components it’s possible false voltage readings could result. The computer codes should be checked to make sure this is the case.

Can check engine light come on for no reason?

If your check engine light comes on, there will always be a reason for it. It’s not, however, always indicative of a major malfunction in your car’s fuel or emissions system. A loose gas cap or an electrical issue, including a faltering or dead battery, could cause the light to come on. The only way to be certain of what’s causing the problem is to have it diagnosed at an auto repair shop because the light could also indicate serious problems like faulty coils or a bad catalytic converter.

Will check engine light reset itself?

Whenever you’ve repaired the issue that caused the check engine light to come on, the light should normally reset itself. This process could actually take some time. So don’t be alarmed if the light stays on for a short period after the repair is made. The car may need to be driven several cycles—or driven until it warms up before stopping—for the light to reset. If the light takes some time to reset, you might have to reset it using an OBD reader, the diagnostic tool technicians use to scan the fault codes. Disconnecting the battery will also cause the light to reset.

What causes check engine light to flash?

If your check engine light is flashing, this normally indicates a repair is urgently needed. Flashing lights are often indicative of one of these problems:

• A defect in the ignition system could include bad spark plugs, hoses, coils, or wires.
• A faulty fuel system including temperature sensors, fuel injectors, or coolant.
• The engine is damaged internally, which could mean the cylinder heads, the pistons and rings, or the timing belt.

How can I check my engine light for free?

Several options are available to test your check engine light for free. You can download an OBD reader app to your smartphone that connects by Bluetooth to your car’s computer. Some auto parts chains provide free diagnostics and some repair shops also provide free diagnostics. Rolling Auto Service provides a free check engine light diagnostic with the purchase of another service.